Specifications

9
ASSEMBLY INSTRUCTIONS
ADDITIONAL SAFETY INSTRUCTIONS FOR POLE
HEDGE TRIMMER (Cont.)
out any modifications of the product. Information about maintenance and repair is
provided in this instruction manual.
9. Know how to stop the product quickly in an emergency.
10.Do not expose to rain. Do not operate the product on a wet hedge.
11.Use the product only in daylight or good artificial light
12.Prolonged use of the product exposes the user to vibrations that can cause a
range of conditions collectively known as hand-arm vibration syndrome (HAVS)
e.g. fingers going white; as well as specific diseases such as carpal tunnel
syndrome.
WARNING! The product must be fully assembled before operation! Do not use
a product that is only partly assembled or assembled with damaged parts!
Follow the assembly instructions step-by-step and use the pictures provided as a
visual guide to easily assemble the product!
Do not connect the product to power supply before it is completely assembled!
For the product, a one-time assembly is required.
1. Loosen upper (5) and lower locking sleeve (7) and pull the pole extension (6)
outward.
2.
Align the pole extension (6) to the support (4) and insert it to full stop .
3.
Fasten both locking sleeves (5, 7).
WARNING! Once assembled the product shall not be disassembled again!
4 5 6 7
Note: The design of this mechanism is subject to change and may include a click-lock
system