Specifications

Instruction Manual / 13
- Do not use in the rain
- Preferably s
tart with the parts closest to the power supply, moving away slowly.
- When cutting, make sure that the extension cord is always drawn behind you the side
already done.
- Start the trimmer before making contact with the hedge to prevent the blade blocking.
- Alternately use the two sides of the blade.
- For efficiency, tilt the blade about 10 ° without poking the tip of the trimmer.
- For horizontal areas, go from the inside to the edge of the fence to cut down the
branches on the ground.
- If the height of the hedge is excessive, making several passes. Between each size,
cut large branches with pruning shears or a lopper.
- Work carefully near fences to avoid blocking the blade.
- In case of blade blocking, stop and discconnect the machine before the cleaning.
3.2.4 Tips for using the hedge trimmer
Fig 4
- Clean the hedge trimmer after each use.
- Maintain the surface of the unit with a s
oft damp cloth. Never clean plastic with a
chemical that may damage it.
3.3 Cleaning, maintenance, transportation and storage
3.3.1 Cleaning the electric hedge trimmer
CAUTION: All cleaning, transportation and maintenance must be done when machine
stopped and unplugged
CAUTION: Never immerse the of the trimmer electric wire in water or other liquids
for cleaning. Never clean the unit with strong high pressure or water .