User guide

CENTER FOR ALLIED HEALTH AND ATHLETICS FF&E April 24, 2014
SECTION 27 41 00 AUDIOVISUAL SYSTEMS
Marshall Craft Associates, Inc. 27 41 00-47
Project 12032
b. Electrical Boxes and Conduit: Electrical Contractor to provide electrical boxes and
conduit below the floor, in the walls, and above the ceiling. Be responsible for all
custom AV plates and the necessary cabling connecting to the system’s equipment.
There shall be a custom floorbox and rackplate location for input/output hook-ups
during presentations. Confirm on site conditions prior to ordering.
c. Program/Speech Reinforcement Loudspeakers: Ceiling-mounted loudspeakers will
be installed for monaural speech and stereo program audio signals. Take care not to
damage the ceiling during installation, and repair or replace any damage caused
during the installation. Audio inputs include, but are not limited to: personal
computers, DVD/VHS Player/Recorder, HD TV Tuner, along with both wired and
wireless microphones.
d. LCD Display: The LCD display shall be installed as detailed on the AV drawings.
e. Video Cameras: Wall mounted video cameras shall be provided at the front and back
of the room as detailed on the AV drawings.
f. Instructor’s Station: This station is to be located at the front the room. At this
position, the station will have AV patch points via an associated room floorbox for
connection to the room’ system.
1) The specified instructor’s stations will house the following:remote control
touchscreen, digital annotation device, digital document camera,
keyboard/mouse,andgooseneckmicrophone.
2) Thestationw illbeequippedwithatasklight.UnittoincludeasingleduplexAC 
powerreceptacleontheworksurface.Laptopaccessshallbeprovided.
g. Equipment Rack/Hardware: Provide rack and all equipment rack hardware, including
vent panels, slide-out shelves, rack mounts and miscellaneous hardware for a
complete and finished system. The equipment rack for this room shall be located as
detailed on the AV series drawings. Provide cable management from the rack to
associated wall plate.
7. Equipment List: On the following pages is the equipment list for this space. Each of
these items shall be priced using both the equipment make and model shown, or
components with equivalent functionality and of newer make, which meet or exceed the
performance characteristics that are outlined for each component in the list. If an item is
listed as “Custom,” this means that the Contractor may use any manufacturer’s
component appropriate for the function and quality required for that item. Submit a “build”
quality shop drawing for approval, on any custom items.
