User guide

CENTER FOR ALLIED HEALTH AND ATHLETICS FF&E-ADDENDUM NO. 02

12032 Marshall Craft Associates, Inc. ADD-02-3

2. (9) Duplex Receptacles

3. (2) Vacuum Outlets

4. (1) Amico Venturi switch to simulate vacuum

5. (2) Quad Data Outlets

6. (3) Conform Platforms

7. Electromagnetic Brakes

Item 2: Revise paragraph 2.10 as follows:

2.10 Imaging Equipment – Supplier VH40

A. Item 31B – X-ray Generator

1. Delmed CM 40KW with Ionization Type automatic exposure control

1. Delmed IT series high frequency 55KW generator.

B. Item 31C – X-ray control panel

1. Delmed – compatible with x-ray generator – 3 phase.

C. Item H31N – Upright Bucky

1. Delmed VT100 or equal – to be compatible with xray table and generator package.

2. WS 04 wall stand with tiltable bucky

3. The grid needs to be compatible with Computed Radiography and Direct Radiography

System.

D. Item H31P – X-Ray table

1. Elevating table Delmed EV650 or equal. Provide complete package including overhead

mounted x-ray tube, generator, and control panel. Also must be compatible with wall

mounted bucky Item H31N

1. Delmed Rad TC-A elevating table with 617 lb patient load capacity and automatic

size sensing cassette tray.

2.The grid needs to be compatible with Computed Radiography and Direct Radiography

System.

E. Item H31R– WiFi Dr image receptor battery charger and 2 batteries

1. Compatible with image receptor Item H31S

F. Item H31S – DR Image Receptor

1. Fugi D-EVO wireless Direct Radiography (DR) 35x43 cm flat panel detector

2. FDX console workstation DICOM compliant

G. Item H31W – Overhead tube crane

1. Delmed OTC 12S-A

2. X-ray Tube3

a. 300,000 Heat Units Capacity

b. 150 kV capable

c. General purpose (Anode angle 14

to 16

)

d. 6 mm Small and 1.2 mm Large Focal Spot