User manual

6 7
9. Refusing Incoming Calls
(For hands-free profile phones) Press and hold multi-function button for 2-3 seconds
until beep sound is heard.
(For Headset profile phones) Call reject must done using the phone(See specific
phone owners manual).
10. Ending Calls
When the conversation is over, press the multi-function button to end the call.
11. Voice Dialing
IMPORTANT: Your mobile phone and carrier must support this feature and or it must
be activated to work properly.
Press the multi-function button for less than 1 second on the headset to activate
voice dialing and follow your mobile phone instructions to proceed with the
voice dialing.
12. Re-dialing Last Call
Press the multi-function button on the headset for 2~3 seconds until you hear a
beep. The last call will then be re-dialed automatically.
13. Transferring Calls Between Headset and Handset
1. To transfer call to phone, press the volume increase (+) button for 2~3
seconds until you hear one beep sound, then the call will be transferred to your
mobile phone.
2. To transfer call to the headset, see your phone’s manual for special phones
specific instructions.
Note:
Your mobile phone must support the hands-free profile. For more details, please check
the manual of your mobile phone.
135 135
NOTE:
• Recommended distance between phone and headset during pairing is 1-3 feet
• If headset is not successfully paired within 2 minutes, it will automatically abandon
pairing mode and revert to standby
• If phone is turned off OR removed from operating range of 32 ft., headset will
automatically turn off after 10 minutes.
7. Wearing the Headset
According to your preference, adjust the headset on your left or right ear.
8. Answering Incoming Calls
IMPORTANT: The working range of the Bluetooth Wireless Headset is 16 feet indoors
and 16 - 32 feet outdoors.
Wait for headset to ring and then press the multi-function button to answer
incoming call.
NOTE:
• If the headset is off, Bluetooth
®
calls must be answered through the handset.