Specifications

ManualsBrandsCobra ManualsKitchen AppliancesCT6

CORRECT LEVEL FOR FRYING MEDIUM WHEN AT

FRYING TEMPERATURE, KEEP TOPPED UP

INDICATES CORRECT FRYING MEDIUM LEVEL

WHEN COLD

1. Clean the griddle with a scraper tool to remove

any food debris.

2. Always ensure that the scraper tool blades are

changed regularly to ensure that the scraper

tool works efficiently and prevents damage to

the griddle plate surface.

Daily Cleaning

1. The crumb tray / grease drawer should be

checked and emptied frequently to prevent

overflow and spillage. Remove the grease

drawer while still warm so that the grease is in a

liquid state. Empty any grease from the drawer

and wash thoroughly in the same manner as any

cooking utensil.

2. Remove the crumb tray and empty out the

contents. Wash thoroughly in the same manner

as any cooking utensil.

3. Thoroughly clean the splash back, interior and

exterior surfaces of the range with hot water, a

detergent solution and a soft scrubbing brush.

4. Brush the griddle surface with a soft bristled

brush. Any carbon deposits should be removed

using the supplied scraper tool followed by

wiping with a cloth to prevent accumulation of

food deposits.

5. Clean the control panel with a damp cloth

lightly moistened with a solution of mild

detergent and water. Wipe dry with a clean dry

cloth.

6. Dry the griddle toaster thoroughly with a dry

cloth and polish with a soft dry cloth.

Weekly Cleaning

NOTE:

 If the griddle toaster usage is very high, we

recommend that the weekly cleaning procedure

is carried out on a more frequent basis.

 Ensure that protective gloves are worn during the

cleaning process.

 DO NOT use harsh abrasive detergents, strong

solvents or caustic detergents as they will dam-

age the griddle toaster and burners.

 DO NOT use water on the griddle plate while it is

still hot as warping may occur. Allow these items

to cool and remove for cleaning.

Part 5 Cleaning and Maintenance

General

 To achieve the best results cleaning must be

regular and thorough and all controls and

mechanical parts checked and adjusted

periodically by a qualified service person.

 If any small faults occur, have them attended to

promptly. Don't wait until they cause a

complete breakdown. It is recommended that

the appliance is serviced every 6 months.

 Clean the griddle toaster regularly. A clean

appliance looks better, will last longer and will

perform better. Carbonised grease on the

surface or on the griddle plate will hinder the

transfer of heat from the cooking surface to the

food. This will result in loss of cooking efficiency.

DO NOT use water on the griddle plate while this

item is still hot as warping and cracking may occur.

Allow the griddle plate to cool down before

cleaning.

NOTE:

 DO NOT use abrasive detergents, strong solvents

or caustic detergents as they could corrode or

damage the griddle toaster.

 In order to prevent the forming of rust on the

griddle plate (Steel Plate), ensure that any

detergent or cleaning material has been

completely removed after each cleaning. The

appliance should be switched on briefly to

ensure the griddle plate becomes dry. Oil or

grease should be spread over the griddle surface

in order to form a thin protective greasy film.

To keep your griddle toaster clean and operating at

peak efficiency, follow the procedures shown

opposite:-

After Each Use

AUTION

Always turn off the gas at the main gas

supply before cleaning.

This appliance is not waterproof. Do not use

water jet spray to clean interior or

exterior of this appliance.

AUTION

Always ensure that an even pressure is

applied over the whole surface of the

scraper tool when using on the flat surface

of the griddle toaster, to prevent scoring of

the surface.

NEVER bang the sharp edge of the scraper

tool on the flat surface of the griddle as this

will damage the finish and invalidate the

warranty.