Operation Manual

Your chainsaw is supplied with an SDS system for quick
assembly
and easy
adjustment
of
the chain tension. The
adjustable outside ring (13) adjusts the tension of the
saw chain and the locking knob (14) tension the bar. (See
Fig.8)
1). Unpack all parts carefully.
2). Place the chain saw on any suitable flat surface.
3). Pull back on the chain brake lever to deactivate the
chain brake.
4). Unscrew counter-clockwise the locking knob of the SDS
to remove the side cover. (See Fig.9)
5). Spread the saw chain out with the cutting edges (A) of the chain pointing in the
direction of rotation. Slide the s
aw chain into the slot around the chain bar.
Ensure chain is in the correct running direction. (See Fig.10a, 10b)
3.1.1 Mounting guide bar and chain
Attention: Wear gloves when handling the saw to prevent accidents relating to the the
chain and bar spikes that are extremely sharp.
Attention: Do not plug the machine in to the power source during assembly.
WARNING! Assembly methods according to the type of your machine, so please
take care to refer to the illustrations and machine type marked on the label. Take great
care when assembling to ensure this is performed correctly.
3.1 Preparation of the chainsaw
3. Instructions for use
8
9
10b
10a