Operation Manual

3.3 Cleaning, storage, transportation and Maintenance
Before any work on the electric chainsaw, disconnect the plug from the wall socket.
3.3.1 Cleaning the chainsaw
Regular cleaning after use will ensure a better functioning electric chainsaw and
reduce the risk of corrosion or rust.
CAUTION: Never immerse the electric chainsaw in water or any other liquid for cleaning.
Never clean the appliance with high pressure water.
After stopping the device and allowing it to cool, remove the cutting debris accumulated
under the cover by blowing with compressed air or cleaning with a brush. If necessary,
wipe it with a soft damp cloth.
3.3.2 Storage and transport of the saw
• Store your chainsaw in a dry, temperate and dark. Put it in a place out of reach of
children.
• For long term storage, drain the oil tank and grease the chain and chain guide before
storage.
• Only carry the chainsaw when it is unplugged and completely stopped. Hold the unit
by the front handle, the guide turned back and the protective scabbard in place.
3.3.3 Maintenance of the chainsaw
Lubricate the chain
• This saw is equipped with an automatic chain lubrication. Regularly check the oil level.
To initiate the supply of oil on the chain, run the saw empty.
Sharpen the chain
• For best results, sharpen the chain regularly, if at least once a year by a specialist
workshop.
Note: A low oil level or a contact with the dull chain can reduce cutting performance
quickly.