SDS

Shenzhen Anbotek Compliance Laboratory Limited
Page
2
of
10
Report No. R011602055B
Shenzhen Anbotek Compliance Laboratory Limited
Address: East of 4/F., Building A, Hourui No.3 Industrial Zone, Xixiang Street, Bao'an District, Shenzhen, Guangdong, China
Tel: [phone] Fax: [phone] Email: [e-mail] Http: //www.anbotek.com.cn
SAFETY DATA SHEET
According to HCS-2012 APPENDIX D TO
§
1910.1200 (Version: 1.0/EN)
Section 1. Identification
(a) Product identifier
Product name: Jump Starter
(b) Other means of identification
Product description:
Model: CPP12000
Nominal Voltage: 11.1V
Rated Capacity: 3700mAh
Watt-hour: 41.1Wh
Input: DC15V Output: DC5V, DC12V
Weight: 0.49kg
(c) Recommended use of the chemical and restrictions on use
Recommended use: Jump Starter
Restriction on use: No information available.
(d) Details of the supplier of the product
Company name(China): Shenzhen Carku technology Co., Ltd.
Address: 2nd Floor A,Block A,Tongsheng Technology Building Huahui Road, Longhua
New District, Shenzhen, China.
Telephone No.: 0755-89955266
Fax: [phone]
Section 2. Hazard(s) identification
(a) Preparation hazards and classification
No harm at the normal use. When the battery is in extreme pressure deformation,
high-temperature environment, overload, short-circuit condition, or disassemble the battery, a n
explosion of fire and chemical burn hazards may occur.
(b) Primary Route(s) of Exposure
These chemicals are contained in a sealed stainless steel enclosure or a sealed aluminums foil
pocket. Risk of exposure occurs only if the cell is mechanically, thermally or electrically abused
to the point of compromising the enclosure. If this occurs, exposure to the electrolyte solution
contained within can occur by inhalation, ingestion, eye c ontact and skin contact.