Operating instructions

Operation

To jump start a vehicle continued:

7. Switch off the jump start power switch.

8. Remove the red positive (+) clamp and then the black negative (-) clamp.

Recharging the power pack battery

CAUTION: Do not operate AC or DC appliance while the power pack is

being charged.

Charging with the AC charging adapter

Using the AC charging adapter is the simplest method for recharging the

battery. While charging from an AC source, the charging status LED indicator

will light red. When the battery has reached capacity, the indicator will light

green. Charging when the battery is fully discharged takes around 23 hours.

NOTE: Recharge the 100W mobile power pack as soon as possible after each

use. When not used the power pack, it should be recharged every 3 months!

To recharge with AC charger:

1. Turn the rotary switch to the “OFF” position.

2. Plug AC charging adapter into charging jack on the front of the unit.

3. Plug AC charging adapter into 120V AC electrical outlet.

4. Continually charge until the battery is fully charged; for about 23 hours.

CAUTION: The 23-hour charging time for the unit assumes that there is 120V

at the AC wall outlet. If the voltage is less than 120V AC, it may take more

than 23 hours to fully recharging. Once fully charged, the charging current

automatically reduces to a floating charge mode, and the unit may be left

permanently connected to the AC charger.