Operating instructions

Introduction

Controls and Indicators:

1. USB power port Provides 5 volts output for consumer

electronics devices.

2. USB power indicator Illuminates when USB port is in use.

3. USB/LED power switch If the switch is flipped left, the USB port can

provide power. Flipped right, the white LED lamps

illuminate. Center position, the USB port and LED

lamps are off.

4. Charging indicator 2-color LED indicator. When the battery is being

charged, this LED indicator lights red, when the

battery is fully charged, the LED indicator lights

green.

5. Charging jack Charge the battery in the unit by inserting the

connector from the AC charging adapter into this jack.

6. Battery level indicators:

Note: It is recommended that you should check the battery voltage every 30

minutes during charging.

7. Battery level button When pressed, indicates the battery charge level.

8. Battery connection Green LED indicates connection to a battery

indicator is correct.

Battery Value Display Mode

U<12.2V Only red LED indicator lights.

12.2V<U<12.4V Red and yellow LED light.

12.4V<U<12.6V Red, yellow and one green LED light.

U>12.6V Red, yellow and two green LED all light.