Full Product Manual

12
13
Nothing Comes Close to a Cobra
®
Operation
Mode Functions
Operation
Customer Assistance WarrantyIntroduction
Roger Beep Confirmation Tone
•
Your listener will hear an audible tone when you release the Talk button.
This alerts the other party that you are finished talking and it is OK for
them to speak.
To turn roger beep on or off:
1. Press the Mode/Power button until the
Roger Beep icon flashes. The current
on or off setting is displayed.
2. Press the Channel Up or Channel Down button
to select roger beep on or off.
3. Choose one of the following:
a. Press the Mode/Power button to enter the
new setting and proceed to other functions.
b. Press Talk or Call/Lock button to return to
Standby mode.
c. Do not press any buttons for 12 seconds to return
to Standby mode.
Roger Beep On
MEM
ESC
TRI
WATCH
SCAN
VOLUME
CALL
MODE
CHANNEL
Mode/Power
MEM
ESC
TRI
WATCH
SCAN
VOLUME
CALL
MODE
CHANNEL
H-M-L
Channel Button
Key Tone On/Off
•
When Key Tone is On, an audible tone will sound each time a button
is pressed.
To turn key tone on or off:
1. Current key tone status On/Off will flash.
2. Press the Channel Up or Channel Down button
to select key tone on or off.
3. Choose one of the following:
a. Press the Mode/Power button to enter the
Standby mode.
b. Press Talk or Call/Lock button to return to
Standby mode.
c. Do not press any buttons for 12 seconds to return
to Standby mode.
MEM
ESC
TRI
WATCH
SCAN
VOLUME
CALL
MODE
CHANNEL
Mode/Power
MEM
ESC
TRI
WATCH
SCAN
VOLUME
CALL
MODE
CHANNEL
H-M-L
Channel Button
Set High/Medium/Low (H-M-L) Power Button
•
Your radio can transmit selectively at 0.5, 1, or 2 watts of power Use
the low power setting for short-range communications and use the high
power setting for long-range communications.
To toggle between H-M-L Power Modes:
1. Press the H-M-L button to select between High,
Medium and Low power settings. The HI, MED
or LO icons will show on the display for the
selected level.
2. When the desired power is selected, press the
Talk button to return to Standby mode.
MEM
ESC
TRI
WATCH
SCAN
H-M-L
VOLUME
CALL
MODE
CHANNEL
H-M-L Button
R
X
Vox
HI MED LO WX
TW DCS Scan
CTCSS Mem
BURP Power Saver
Hi/Med/Lo Icon
Channel 8 through 14 only operates on
Low power setting.
Talk Button
MEM
ESC
TRI
WATCH
SCAN
H-M-L
VOLUME
CALL
MODE
CHANNEL