Full Product Manual

ManualsBrandsCobra ManualsElectrical37-Mile Range Rugged and Floating 2-Way Radio, Camo

Operation

Mode Functions

Nothing Comes Close to a Cobra

Operation

Customer Assistance WarrantyIntroduction

VibrAlert

and Call Alert

•

Your MicroTALK

radio can alert you to incoming

signals by sounding an audible call tone or an

audible tone with VibrAlert

To change call settings:

1. Press the Mode button until the Call Setting

icon flashes on the display. The current setting

(“01” vibrate + ring, “02” ring only) is displayed.

2. Press the Channel Up or Channel Down button to

change the call setting.

3. Choose one of the following:

a. Press the Mode button to enter the new

setting and proceed to other functions.

b. Press Talk or Call/Lock button to return to

Standby mode.

c. Do not press any buttons for 12 seconds to return

to Standby mode.

Ten Call Tone Settings

•

You can choose between ten different Call Tone Settings to transmit

a call alert.

To change a call tone setting:

1. Press the Mode/Power button until the

letter “C” and the current call tone number

(01 through 10) is displayed. The current

call tone will sound for three seconds.

2. Press the Channel Up or Channel Down button

to hear the other call tone settings.

3. Choose one of the following:

a. Press the Mode/Power button to enter the

new setting and proceed to other functions.

b. Press Talk or Call/Lock button to return to

Standby mode.

c. Do not press any buttons for 12 seconds to return

to Standby mode.

Call Tone Setting

Vox

HI MED LO WX

TW DCS Scan

CTCSS Mem

BURP Power Saver

Call Tone On/

Vibrate On

Vox

HI MED LO WX

TW DCS Scan

CTCSS Mem

BURP Power Saver

Call Tone On/

Vibrate Off

MEM

ESC

TRI

WATCH

SCAN

VOLUME

CALL

MODE

CHANNEL

Mode/Power

MEM

ESC

TRI