Operation Manual

Maintenance
• Place switch in "0" off position and unplug from the power supply before the blower
vac is serviced, c
leaned or maintenance is performed.
• Keep air intake clean and air vents free of debris to avoid overheating the motor.
• Do not use cleaning agents to clean the plastic parts of the tool. A mild detergent on a
damp cloth is recommended. Water must never come into contact with the tool.
• If the blower vac vibrates abnormally, stop motor immediately. Abnormal vibration
usually indicates a mechanical problem present and continued operation could lead
to injury or damage.
•
This tool is designed for consumer use only. U se in commercial or industrial
environments will void the warranty.
13