Installation manual
VEHICLESECURITY
FITTING INSTRUCTION FITTING INSTRUCTION
FITTING INSTRUCTION FITTING INSTRUCTION
FITTING INSTRUCTION BRIDGE 4100
24
Back-up signalBack-up signal
Back-up signalBack-up signal
Back-up signal
This function makes the external buzzer operate when the reverse gear is engaged.
The boot input (white/blue wire) must be connected to the reverse wire, configured with positive
polarity (page 2 line 8) activated.
PagerPager
PagerPager
Pager
Negative command for controlling a Pager module.
ATTENTION! to reset the factory SET UP from any of the tables, press for 3 s bothATTENTION! to reset the factory SET UP from any of the tables, press for 3 s both
ATTENTION! to reset the factory SET UP from any of the tables, press for 3 s bothATTENTION! to reset the factory SET UP from any of the tables, press for 3 s both
ATTENTION! to reset the factory SET UP from any of the tables, press for 3 s both
radio control push buttons.radio control push buttons.
radio control push buttons.radio control push buttons.
radio control push buttons.
VEHICLESECURITY
MANUEL D’INSTALLATION MANUEL D’INSTALLATION
MANUEL D’INSTALLATION MANUEL D’INSTALLATION
MANUEL D’INSTALLATION BRIDGE 4100
41
Signalisation de marche arrière enclenchéeSignalisation de marche arrière enclenchée
Signalisation de marche arrière enclenchéeSignalisation de marche arrière enclenchée
Signalisation de marche arrière enclenchée
Quand vous passez la marche arrière cette fonction permet de déclencher un son du buzzer
extérieur ; pour activer cette fonction, utiliser l’entrée du coffre (fil blanc/bleu) reliée au fil de la
marche arrière, avec polarité positive (page 2 ligne 8) active.
PagerPager
PagerPager
Pager
Commande négative pour le contrôle du module Pager.
ATTENTION! pour rétablir la CONFIGURATION d’usine depuis un tableau quelconque,ATTENTION! pour rétablir la CONFIGURATION d’usine depuis un tableau quelconque,
ATTENTION! pour rétablir la CONFIGURATION d’usine depuis un tableau quelconque,ATTENTION! pour rétablir la CONFIGURATION d’usine depuis un tableau quelconque,
ATTENTION! pour rétablir la CONFIGURATION d’usine depuis un tableau quelconque,
appuyer pendant 3 secondes sur les deux touches de la radiocommande.appuyer pendant 3 secondes sur les deux touches de la radiocommande.
appuyer pendant 3 secondes sur les deux touches de la radiocommande.appuyer pendant 3 secondes sur les deux touches de la radiocommande.
appuyer pendant 3 secondes sur les deux touches de la radiocommande.
06DE2143A installatore Segn.pmd 20/10/2005, 12.1524