Specifications

Temporary Mobile Set-Up
Home And Office Set-Up
3938
Temporary Mobile Operation
For temporary mobile operation you may want to
purchase an optional cigarette lighter adapter from
your COBRA dealer. This adapter and a magnetic
mount antenna allow you to quickly “install” your
transceiver for temporary use.
Base Station Operation
To operate your transceiver from home or office
you will need a 13.2 volt DC Power Supply rated at a
minimum of 2 amps, and a properly installed base
station antenna.
Warning!
Do not attempt to operate this
transceiver by connecting it directly
to 120V AC.
1
Connect the properly installed and matched base
station antenna.
Simply connect the red (+) and black (-)
leads of the transceiver to the corresponding
terminals of the power pack.
Plug the power cable into the back of the unit
marked “Power”. Be sure to observe the polarity
markings.
2
3
AW-1210039-1B_29LX_MAX_MANL_REV_022021.indd 38-39AW-1210039-1B_29LX_MAX_MANL_REV_022021.indd 38-39 2/24/21 2:56 PM2/24/21 2:56 PM