Specifications

Temporary Mobile Set-Up
27
Base Station
Operation
(From 220/240V
AC Domestic
Current)
Temporary
Mobile Set-Up
Temporary Mobile Operation
For temporary mobile operation you may want to
purchase an optional cigarette lighter adapter
from your COBRA dealer.This adapter and a mag-
netic mount antenna allow you to“install”your
transceiver quickly for temporary use.
Base Station Operation
(From 220/240V AC Domestic Current)
To operate your transceiver from home or office
you will need a 13.8 volt DC Power Pack rated at a
minimum of 2 amps,and a properly installed base
station antenna.
Home And Office Set-Up
26
Warning!
Do not attempt to operate this
transceiver by connecting it
directly to 220/240 V AC.
1
Connect properly installed and matched base
station antenna.
Connect the red (+) and black (-)
leads of the transceiver to the corresponding
terminals of the power pack.
Plug power cable into back of unit marked
“Power”. Be sure to observe polarity markings.
2
3
29 UK-English.qx 6/22/99 12:15 PM Page 26