Specifications

Home And Office Set-UpTemporary Mobile Set-Up
25
24
Temporary
Mobile Set-Up
Temporary Mobile Operation
For temporary mobile operation you may want to
purchase an optional cigarette lighter adapter
from your COBRA dealer.This adapter and a mag-
netic mount antenna allow you to“install”your
transceiver quickly for temporary use.
Base Station
Operation
(From 220/240V
AC Domestic
Current)
Base Station Operation
(From 220/240V AC Domestic Current)
To operate your transceiver from home or office
you will need a 13.8 volt DC Power Pack rated at a
minimum of 2 amps,and a properly installed base
station antenna.
Warning!
Do not attempt to operate this
transceiver by connecting it
directly to 220/240 V AC.
1
Connect the red (+) and black (-)
leads of the transceiver to the corresponding
terminals of the power pack.
Connect properly installed and matched base
station antenna.
Plug power cable into back of unit marked
“Power”. Be sure to observe polarity markings.
2
3
GR25LTDST-English copy 6/21/99 12:00 PM Page 24