Specifications

Transmit
Push and hold microphone button to transmit.
Transmitter is now activated.When transmit-
ting,hold the microphone two inches from
your mouth and speak in a clear,normal voice.
Release to receive.
1
Transmit
2120
Operation Operation
External Speaker
External Speaker
The external Speaker jack is used for remote
receiver monitoring.
Note
The external speaker should
have 8-ohm impedance and be
rated to handle at least 4 watts.
When the external speaker is
plugged in,the internal speaker
is automatically disconnected.
Note
Cobra external speakers are
rated at 10 watts.
Connect an external speaker to the external
speaker jack on the rear panel.
1
RF Meter
RF Meter
This meter swings proportionately to the RF
output (outgoing signal) while transmitting.
GR25LTDST-English copy 6/21/99 11:59 AM Page 20