User guide

5
In case of lack a driver card, the emergency code is also able to
disarm the system for about fi ve minutes, allowing you to start the
vehicle without generating false alarms.
The following is the procedure to do:
Note: fi rst be sure to have with you the emergency code to four digits.
1. Turn ON the ignition and leave the key in the ON position for at
least 2 min.
2. Turn OFF the ignition and leave it in this position for a time
equivalent to the value of the fi rst digit of your code
multiplied by 10 s
3. Turn ON the ignition and leave it in this position for a time
equivalent to the value of the second digit of your code multiplied
by 10 s
4. Turn OFF the ignition and leave it in this position for a time
equivalent to the value of the third digit of your code multiplied by 10 s
5. Turn ON the ignition and leave it in this position for a time
equivalent to the value of the fourth digit of your code
multiplied by 10 s
6. Turn OFF the ignition
7. Start the engine
If the engine does not start, repeat the procedure from step 1.
Example with emergency code equivalent to "1234":
USER GUIDE
- Turn ON the ignition for 2 min.
- Turn OFF the ignition for 10 s
- Turn ON the ignition for 20 s
- Turn OFF the ignition for 30 s
- Turn ON the ignition for 40 s
- Turn OFF the ignition
- Start the engine
Note: If you enter a wrong emergency code for at least fi ve attempts
during the same day, it will be notifi ed to you and you will have to
wait at least fi ve minutes before repeat the unlock procedure.
In case you are not aware of such attempts, immediately contact
the security center.