How to Guide

14 | Page
Marking Locations
The MRK button allows you to mark a specific location and label it for future reference.
Once marked, MAX 3 will provide an alert when you reach this area again.
MAX 3 gives advanced warning of upcoming markers at the following distances:
Red light cameras - 250 ft or 10 seconds
Red light & speed cameras - 250 ft or 10 seconds
Speed cameras - 500 ft when traveling below 55 mph
1,000 ft when traveling above 55 mph
Speed traps - 0.3 mi or approximately 1,584 ft
Other - 500 ft when traveling below 55 mph
1,000 ft when traveling above 55 mph
To Mark A Location
- Press MRK. The display will read “Mark?” Press MRK again to bring up a menu of
markers to choose from.
- Repeatedly press MUTE to scroll through the markers then press MRK to select the
marker that you wish to use at this location.
- The display will read “Marked!”
Air Patrol locations cannot be marked by the user.
Note: When a location is marked the first time, you must travel at least 1 mile away from
that location to receive an alert when you return to the area.
To Unmark A Location
Touch the MRK button when you are receiving a marked-location alert. The display will
read “Unmark?” Touch the MRK button again to confirm. The display will read
“Unmarked!”