How to Guide

13 | Page
Alert Tones
Standard
The factory default Standard alert tones uses a Geiger counter-type sound to indicate
the signal strength and type of radar signal being encountered. When you encounter
radar, a distinct audible alert will sound and will increase as the signal gets stronger. This
allows you to judge the distance from the signal source without taking your eyes off of
the road. Each band has a distinct tone for easy identification:
X band = beep tone
K band = brap tone
Ka band = double-brap tone Laser = solid brap tone
POP = solid brap tone
Standard Plus
Features the Standard alert tones outlined above for the primary alert, plus double-
beep tones for additional alerts.
Mild
Mild alert tones offer softer, simpler alert tones that are less obtrusive to the driving
experience:
X band, K band, Ka band and POP = Doorbell chime
Low signal strength = Double chime
High signal strength = Triple chime
If alert remains in area more than 15 seconds = Single chime (as a reminder)
Laser = Solid brap tone
Since laser signals are a possible threat no matter how weak, laser alerts are always full
strength.
AutoMute
Your RedLine 360c also includes ESCORT’s patented AutoMute feature. Once RedLine 360c
alerts you to a radar encounter at your selected volume level, it automatically reduces the
volume to the selected AutoMute level. This keeps you informed without the annoyance of a
continuous full-volume alert. If you prefer, you can turn the AutoMute feature off.
AutoLearn
The AutoLearn feature analyzes (over time) the source of radar signals by location and
frequency. This allows RedLine 360c to determine if a fixed location signal is a real threat or a
false one. If it determines that the signal is an automatic door opener, motion sensor, etc., it
automatically locks out this source at this particular location. A “Stored” message will appear on
the display when a signal has been automatically locked out. AutoLearn typically needs to
encounter the exact frequency in the same location approximately three times to lock it out.
Since some door openers are turned on and off routinely, some variations may occur. RedLine
360c will also unlearn signals to protect you from locking out real threats. If a particular signal is
no longer present at a location that was previously locked out, RedLine 360c will unlock that
signal. If you prefer, you can turn the AutoLearn feature off.