User's Manual

Nothing Comes Close to a Cobra

Programming Overview

•

Begin all programming or setup with MENU/SAVE button.

Select this to change USER or ALERT settings. USER

settings customize how system handles alert filtering,

audio-related options, visual options and system-related

options. ALERT settings determine which ALERT types

are activated. ALERT settings on the XRS R9G model

includes GPS-related features.

Press MENU/SAVE button again to save feature and

function changes and return to Standby screen. If a

button is not pressed within 15 seconds while in

Setup/Programming mode, Standby screen displays and

settings made up to this point are saved automatically.

NOTE: You can restore factory settings at any time.

Enter USER or ALERT settings sub-menu and display

shows left arrow

, down arrow  and right arrow.

Arrows correspond with arrows on DIM, MUTE and CITY

buttons on RDU.

Press left arrow

to return to previous screen. Press

right arrow

to access next screen. Press down arrow

 to make change. Press MENU/SAVE button to exit

setup program and save new settings. If a button is not

pressed within 15 seconds while in Setup/Programming

mode, Standby screen displays and settings made up to

this point are saved.

Each of these functions and settings are explained in

SETTINGS section of this manual.

NOTE: Advancing at the end of menu returns to beginning of menu.

NOTE: Setup/Programming mode cannot be accessed during an alert.

Unit does not detect signals while in Setup/Programming mode.

EasySet Programming

User Settings

Alert Settings

Your Detector

XRS_R7_R9G_1-5-07.qxd:Layout 1 1/9/07 5:15 PM Page 21

FOURTH DRAFT