User's Manual

Optional Global Position
System Locator
34
English
User Location Alerts
The system can store up to 1,000 User Location Alerts to provide warnings at
locations not included in the built-in GPS Locator database. Whenever your vehicle
approaches a user set location, an alarm will be provided with a unique chime and
the flag icon will become progressively larger as you approach the location.
■
To set a User Location: Press and hold the Menu/Save button for at least
two seconds when the vehicle is at a location you want to save.
■
To delete a specific User Location: Press and hold the Menu/Save button
for at least two seconds while at that location and the User Location Alert
is sounding. A specific location can be deleted
only while at that location.
■
To delete all User Locations: When an Optional GPS Locator unit is
installed, you can delete all user-entered Location Alerts in Menu mode
(see page 15).
Speed Alert
When a GPS Locator unit is installed and receiving a signal and Speed Alert
mode is turned On, the detector will sound an alert whenever the vehicle's
speed exceeds the set point you have selected. The speed settings can be
adjusted in 5 mph or km/h increments. The factory setting is Speed Alert Off.
Speed units can be selected as a User setting. See pages 14 and 15 for User
and Alert Menus.
Vehicle Location
When a GPS Locator unit is installed and receiving a signal, you can determine
the position (latitude and longitude) of your vehicle from the Lat/Lon standby
screen. See page 8.
Compass
When a GPS Locator unit is installed and receiving a signal, you can see your
direction of travel based on the GPS system. The GPS compass overrides
the magnetic compass except when the GPS signal is lost.
GPS Database Information
When a GPS Locator unit is installed, you can view the version and date
on which the installed database of Photo Enforcement and Caution Area
Locations was updated. To update the database, go to Cobra's website
(www.cobra.com/AURA) and follow the online instructions.
Optional
GPS Locator
Getting Started
Your Detector
Nothing Comes Close to a Cobra
®
7
Standby Screen Icons
•
City Mode
Highway Mode
Magnetic Compass
IntelliMute Above
Activation Point
IntelliMute Below
Activation Point
User and Alert
Settings Menu
Car Battery Voltage
Your detector uses the following icons to indicate modes and functions when set:
Sample Screen
(see note)
NOTE
For example, the sample screen indicates that IntelliMute is active, the Compass
is calibrated and your system is set to Highway mode. The satellite icon will
show only if the Optional GPS Locator is installed.
Standby Screens
•
Press Mute while the down arrowhead is
displayed at the top center of any Standby
screen to cycle through and select a different
screen. The Standby screens will be displayed
in the order shown to the left.
NOTE
Compass will display if either the magnetic
compass in the detector unit is turned On and
calibrated or the Optional GPS Locator unit
is installed and receiving a signal. Speed and
and Latitude/Longitude (marked with an *)
will display only if the Optional GPS Locator
unit is installed and receiving a signal.
NOTE
Last Standby screen viewed will be displayed when
exiting Display Timeout mode.
Main Standby
Screen
Speed
Car Voltage
I-Mute/I-Mute Pro
City/Hwy Mode
Latitude/Longitude
Compass
*
*
Body.qxd 8/29/08 10:00 AM Page 7