User's Manual

Overview
Introduction
2
English
This manual describes the simple steps for mounting, setting up and using your
detector. It also provides helpful information about how radar and laser guns are
used and how you can interpret the alerts you receive.
Before you begin your installation, please read the Important Information section
on page A1 and use the descriptions and feature lists on pages A2 and A3 to
become familiar with your new detector.
About Your Detector
•
Display
This detector’s innovative new display provides more, easier-to-use information
than any technology to date. Using an OLED (Organic Light Emitting Diode)
screen, the display offers large graphical alerts to signals as they are detected.
Do not be alarmed by the nearly blank display you see when you first turn the
unit On. The detector will function and alerts will appear as signals are detected.
You can also elect to turn On the built-in Compass, IntelliMute and IntelliMute
Pro, so that they appear during normal operation. The initial and startup screens
are shown on page 6.
EasySet Menu
EasySet Menu lets you conveniently customize the operation of your detector by
changing the settings. You may want to start using the detector with the factory
settings and then make changes after you are more familiar with the unit.
About This Manual
•
Once the detector is in use, the modular descriptions in this manual can
be used as a ready reference to individual topics as needed. Each topic is
completely covered in its section and cross-references to related topics are
included where appropriate.
Product Service
Customer Assistance
Nothing Comes Close to a Cobra
®
39
Product Service
•
For any questions about operating or installing this new Cobra product, or if
parts are missing…PLEASE CALL COBRA FIRST…do not return this
product to the store. See customer assistance on page A1.
If this product should require factory service, please call Cobra before
sending the product. This will ensure the fastest turn-around time on any
repair. If Cobra asks that the product be sent to its factory, the following
must be furnished to have the product serviced and returned:
1. For Warranty Repair include some form of proof-of-purchase, such as
a mechanical reproduction or carbon of a sales receipt. Make sure the
date of purchase and product model number are clearly readable. If the
originals are sent, they cannot be returned;
2. Send the entire product;
3. Enclose a description of what is happening with the product. Include
a typed or clearly printed name and address of where the product is
to be returned, with phone number (required for shipment);
4. Pack product securely to prevent damage in transit. If possible,
use the original packing material;
5. Ship prepaid and insured by way of a traceable carrier such as
United Parcel Service (UPS) or Priority Mail to avoid loss in transit to:
Cobra Factory Service, Cobra Electronics Corporation, 6500 West Cortland
Street, Chicago, Illinois 60707 U.S.A.;
6. If the product is in warranty, upon receipt of the product it will
either be repaired or exchanged depending on the model. Please
allow approximately 3 – 4 weeks before contacting Cobra for status.
If the product is out of warranty, a letter will automatically be sent
with information as to the repair charge or replacement charge.
For any questions, please call 773-889-3087 for assistance.
Body.qxd 8/29/08 10:00 AM Page 2