User's Manual

Detection
Your Detector
24
English
Type of Signal Visual Display Voice
X Band Radar X Alert
K Band Radar K Alert
Ka Band Radar Ka Alert
Ku Band Radar Ku Alert
Pop Radar Mode Pop Alert
Signal Strength
Signal
Strength = 1
(Weakest Signal)
(Strongest Signal)
Signal
Strength = 2
Signal
Strength = 3
Signal
Strength = 4
Signal
Strength = 5
Radar Signals and Visual Displays
Settings
Your Detector
Nothing Comes Close to a Cobra
®
17
IntelliMute Mode
IntelliMute allows you to avoid audio alerts you don’t need to hear because you
are stopped or moving slowly. By sensing the RPMs of your engine, IntelliMute
knows when you are at low speed and automatically mutes alerts (except for strobe
signals from emergency vehicles). It works with all City and Auto Mute modes.
The IntelliMute icon will appear in the display when IntelliMute is On and the
activation point has been set. Whenever engine RPMs are below the Activation
Point, the arrow points down. When RPMs are above the Activation Point the
arrow points up.
Below
Activation Point
Above
Activation Point
IntelliMute Pro Mode
IntelliMute Pro prevents detection by radar detector detectors (RDDs) such as
VG-2, Spectre I and Spectre IV+ when traveling at slower speeds. It is intended
for use by experienced users only.
When IntelliMute Pro is turned On, and engine RPMs are below the IntelliMute
Pro Activation Point, your detector’s radar detection circuits are turned Off to
prevent detection by RDDs.
The IntelliMute Pro icon will appear in the display when IntelliMute Pro is On
and the Activation Point has been set. Whenever engine RPMs are below the
Activation Point, the arrow points down with the “i” blinking. When RPMs are
above the Activation Point the arrow points up with the “i” blinking.
Above
Activation Point
Below
Activation Point
CAUTION
When Intellimute Pro is On, NO radar signals will be detected and NO alerts
will be given at RPMs below the IntelliMute Pro activation point.
Body.qxd 8/29/08 10:00 AM Page 17