User's Manual
Settings
Your Detector
16
English
User Settings
•
IntelliShield City Mode Default
City Mode Default makes three levels of Audio Alert suppression available
when you toggle from Highway to City mode (see page 10). The factory
setting is City X.
City X sounds a single beep when an x band signal is first detected.
The alert then sounds when signal strength reaches level 3.
City X+K combines the City X mode with prevention of K band audio
alerts until the signal strength reaches level 2.
City X Beep Off blocks all X band audio alerts until the signal strength
reaches level 3.
The City Mode Default can be changed in Menu mode. It can also be changed
at any time the detector is in Standby mode:
1. Press and hold the City
button for at least two seconds.
The three City modes will be sequentially displayed for three
seconds each as long as the button is pressed.
2. Release the City
button while the desired City mode is
displayed to set that mode as the default.
IntelliMute and IntelliMute Pro Modes
IntelliMute and IntelliMute Pro are two features that are active at slow speeds
and when your vehicle is stopped. Both depend on your detector sensing the
vehicle’s engine “revs” (RPMs) to function. Either feature can be turned On
in Menu mode, but not both at the same time. The factory settings are IntelliMute
Off and IntelliMute Pro Off.
After turning On IntelliMute or IntelliMute Pro, you must then set an Activation
Point for your engine’s RPMs (see page 18). Whenever the RPMs are below
that point, IntelliMute will begin muting or IntelliMute Pro will turn Off the radar
detection circuits. The Activation Point will be stored in memory and recalled
each time the power is turned On.
NOTE
IntelliMute and IntelliMute Pro may not work with some vehicles because the unit
cannot sense the engine’s RPMs. In such a case, Auto Mute and City mode can
reduce some unwanted audio alerts.
Detection
Your Detector
Nothing Comes Close to a Cobra
®
25
NOTE
Beep rate changes with different laser alerts.
* Your detector provides 360˚ detection of these signals.
Type of Signal Visual Display Voice
LTI 20-20* Laser Alert
LTI Ultra-Lyte* Laser Alert
Kustom Signals
ProLaser*
Laser Alert
Kustom Signals
ProLaser III*
Laser Alert
Stalker LIDAR* Laser Alert
Laser Atlanta –
Speedlaser*
Laser Alert
Laser – Other Laser Alert
Laser Signals and Visual Displays
Body.qxd 8/29/08 10:00 AM Page 16