User's Manual

Detection
Your Detector
16
English
Strobe and Safety Alert Signals, Voice and Visual Displays
Type of Signal Voice Visual Display
3M Opticom or Tomar* Emergency Vehicle Approaching Emergency Vehicle
Emergency Vehicles Emergency Vehicle Approaching Emergency Vehicle
Road Hazards Road Hazard Ahead Road Hazard
Trains Train Approaching Train
* Your detector provides 360˚ detection of this signal.
VG-2 Alert Signal, Voice and Visual Display
Type of Signal Voice Visual Display
Interceptor VG-2 VG-2 Alert VG2
NOTE
There are different tones for each Safety Alert.
NOTE
There are different tones for each alert.
NOTE
There are different tones for each alert.
Emergency Alert
Signal Detected
VG-2 Alert Signal
Detected
VG2
Spectre 1 Alert Signal, Voice and Visual Display
Type of Signal Voice Visual Display
Spectre Spectre Alert Spectre1
Spectre 1 Alert Signal
Detected
Spectre1
Road Hazard Alert
Signal Detected
Road
Hazard
Train Alert Signal
Detected
Train
Emergency...
Strobe Alert Display
(Flashing)
Emergency...
Settings
Your Detector
Nothing Comes Close to a Cobra
®
9
IntelliMute
IntelliMute is a unique new feature that allows you to avoid alerts you
don’t need to hear because you are stopped or moving slowly. By sensing
the “revs” (RPMs) of your engine, IntelliMute knows when you are at low
speed and automatically mutes alerts (except for strobe signals from
emergency vehicles).
Before IntelliMute will work, you must set an activation point for your engine’s
revs (see page 11). Whenever the revs are below that point, IntelliMute will
begin muting. The activation point will be stored in memory and recalled
each time the power is turned on. The factory setting is IntelliMute off.
NOTE
IntelliMute may not work with some vehicles because it cannot sense
the engine’s revs. In such cases, you can reduce unwanted audio alerts
by using Auto Mute and City mode when appropriate.
IntelliMute Button
Press and release
To Turn IntelliMute On
Press and release
the IntelliMute
button.
Tone Voice
Visual Display
Two beeps IntelliMute On
i appears in
the display
To Turn IntelliMute Off
Press and release
the IntelliMute
button again.
Tone Voice
Visual Display
One beep IntelliMute Off None
IntelliMute On
ih
10216_XRS9540_PH2.qxd 8/7/07 1:28 PM Page 9