User Manual

English
Mode Functions
12
Operation
Five (5) Call Tone Settings
•
You can choose between five (5) different Call Tone Settings to
transmit a unique call alert.
To Change A Call Tone Setting:
1. Press the Mode/Power button until the
letter “C” and the current call tone number
(01 through 05) is displayed.
2. Press the Channel Up or Channel Down
button to hear the other call tone settings.
3. Choose one (1) of the following:
a. Press the Mode/Power button to
enter the new setting and proceed
to other functions.
b. Press the Lock button to enter the new
setting and return to Standby mode.
Roger Beep Confirmation Tone
•
Your listener will hear an audible tone when you release the Talk
button. This alerts the other party that you are finished talking and
it is OK for them to speak.
To Turn Roger Beep On Or Off:
1. Press the Mode/Power button until the
Roger Beep icon flashes. The current
On or Off setting is displayed.
2. Press the Channel Up or Channel Down
button to select roger beep On or Off.
3. Choose one (1) of the following:
a. Press the Mode/Power button to enter the
new setting and return to Standby mode.
b. Press the Lock button to enter the new
setting and return to Standby mode.
Call Tone Setting
Mode/Power Button
Channel Button
Roger Beep Off
Mode/Power Button
Channel Button
Auto Squelch/Maximum Range
•
Your microTALK
®
radio is equipped with Auto Squelch, which
automatically shuts Off weak transmissions and unwanted noise
due to terrain, conditions, or if you’ve reached your Maximum
Range limit.
You can temporarily turn Off auto squelch or turn On maximum
range extender, allowing all signals to be received and extending
the maximum range of your radio.
To Temporarily Turn Off Auto Squelch:
1. Press the Light/Max Range button for
less than five (5) seconds.
If you hear two (2) beeps, you have turned
the maximum range extender On (see below).
To Turn Maximum Range Extender On:
1. Press and hold the Light/Max Range button
for at least five (5) seconds until you hear
two (2) beeps which indicates the maximum
range extender is On.
To Turn Maximum Range Extender Off:
1. Press and release the Light/Max Range
button or change channels.
Lock Function
•
The Lock function locks the Channel Up, Channel Down, and
Mode/Power buttons to prevent accidental operation.
To Turn The Lock On Or Off:
1. Press and hold the Lock button for
two (2) seconds.
A double beep sound is used to confirm your
lock On or Off request. When in Lock mode,
the Lock icon will be displayed.
Customer Assistance WarrantyIntroduction Operation
5
Nothing comes close to a Cobra
®
Lock Icon
Lock Button
Light/Max Range
Job: 245.qxd -- Color: Composite -- Signature 1, Sheet 3, Front -- Plate 5