Two-Way Radio Model MT 650 ENGLISH 1 2 10 3 4 9 1. Antenna 2. External Speaker/ Microphone/Charge Jack 3. Mode/Power Button 4. Lock Button 5. Channel Select Buttons 6. Speaker/Microphone 7. Light/Max Range Button 8. Volume Control Buttons 9. Talk Button 10. Call Button 11. Belt Clip 12. Battery Compartment 13. Lock Tab 5 8 11 6 12 13 Printed in China Part No.
PRODUCT FEATURES English Features • Two-Way Radio with up to a 5 km (3 mile) range • 8 Channels* • 38 CTCSS Privacy Codes • 83 DCS Privacy Codes • Backlit LCD Display • Battery Saver Circuitry • Maximum Range Extender • Call Alert (5 selectable tones) • Scan (Channel, Privacy Codes) • Vox Mode for Hands-Free Operation • Auto Squelch • Selectable On/Off "Roger Beep" Confirmation Tone • Key Lock • External Speaker/Microphone/Charge Jack • Belt Clip • Rapid Charger and Rechargeable Batteries 2 1 3 4 11
OPERATION Rapid Charger and Rechargeable Batteries English Remove Belt Clip Lock Tab Insert Batteries To Insert Batteries in Radio: 1. Remove belt clip by releasing belt clip latch and sliding clip up. 2. Push up on lock tab to remove battery cover. 3. Insert batteries according to polarity markings. NOTE: Estimated operation time on full charge: 12 hours. These rechargeable batteries must be recycled or disposed of properly in compliance with all applicable laws.
OPERATION English Communicating with Another Person Talk Button 1. Press and hold the TALK button. 2. With the microphone about 5 cm (2 inches) from your mouth, speak in a normal voice. 3. Release the button when you have finished talking and listen for a response. You cannot receive incoming calls while pressing the TALK button. NOTE: Both radios must be tuned to the same channel and privacy code to communicate.
OPERATION English To Illuminate Display Light/Max Range Button – Press and release the LIGHT/MAX RANGE button to illuminate the display for 10 seconds. Auto Squelch/Maximum Range Extender Your microTALK® radio is equipped with Auto Squelch, which automatically shuts off weak transmissions and unwanted noise resulting from terrain, conditions or from reaching your maximum range limit.
MODE FUNCTIONS OPERATION English Scrolling Through the Mode Functions By scrolling through the Mode Functions, you will be able to select or change preferred features of your microTALK® radio.
MODE FUNCTIONS OPERATION DCS Privacy Codes DCS (Digital Coded Squelch) is an advanced digital coding system allowing you to select one of 83 privacy codes to reduce incoming transmissions from other users on the channel. NOTE: If you are using a DCS code, both radios must be turned to the same channel and DCS privacy code to communicate. Each channel will remember the last code you selected. To Select a DCS Privacy Code: 1.
MODE FUNCTIONS OPERATION Mode Button Select VOX Sensitivity Level Channel Buttons English To Set the VOX Sensitivity Level: 1. Press the MODE button until the VOX icon flashes and the current sensitivity level is displayed. The current sensitivity level is displayed with the letter “L” and a number 1 to 5, 5 being the most sensitive level and 1 being the least sensitive level. 2. Press the CHANNEL UP or CHANNEL DOWN button to change the setting. 3.
MODE FUNCTIONS OPERATION Select Channel Select Scan Privacy Codes Mode Button Channel Buttons English CTCSS Privacy Code Scan Your microTALK® radio can automatically scan the CTCSS privacy codes (01 to 38) within one (1) channel. To Scan Privacy Codes: 1. While in LISTENING MODE, press the CHANNEL UP or CHANNEL DOWN button to choose the channel on which you wish to scan the CTCSS privacy codes. 2. Press the MODE button until the Scan icon, CTCSS icon and the small numbers flash on the display. 3.
MODE FUNCTIONS OPERATION DCS Privacy Code Scan English Mode Button Select Channel You can automatically scan the DCS privacy codes (01 to 83) within one channel. NOTE: The radio must be in the CTCSS OFF MODE when scrolling through mode functions or DCS mode will be skipped. To Scan DCS Privacy Codes: 1. While in the LISTENING MODE, press the CHANNEL UP or CHANNEL DOWN button to choose the Select Scan Privacy Channel Buttons Codes channel on which you wish to scan the DCS privacy codes. 2.
MODE FUNCTIONS OPERATION English Set Call Tones Mode Button You can choose between five (5) different call tones to transmit a unique call alert. To Change a Call Tone Setting: 1. Press the MODE button until the letter “C” is displayed. The current call tone number will be flashing on the display next to the “C.” The current call tone will sound for one (1) second. 2. Press CHANNEL UP or CHANNEL DOWN button to hear the other call tone settings. 3.
D.O.C., WARRANTY & CUSTOMER SERVICE Declaration of Conformity Warranty & Customer Service This declaration is the responsibility of the manufacturer/importer Cobra Electronics Europe Limited Dungar House Northumberland Avenue Dun Laoghaire County Dublin, Ireland Date: 15 January 2007 For warranty and customer service information, please contact your local dealer.
