Operating Instructions for your Cobra® 9 Band® Extra Sensory Detection® Radar/Laser Detector Model ESD-9150 Nothing comes close to a Cobra™
How to Use Your Cobra ESD Radar/Laser Detector Introduction Introduction and Strobe Alert™ Use of this product is not intended to,and does not ensure that the motorist and any passenger will not be involved in a traffic accident. It is only intended t o alert the motorist that an emer gency or service vehicle equipped with a CODE 3,Strobe (Opticom* or Tomar Preemption System) or Cobra Safety Alert Transmitter is in the area as defined by the range of the product.
Controls and Indicators Our Thanks to You 1. On/Off Volume Control 2. Mute Button 7 3. Dim Button 4. Audio Alerts Speaker Thank you for purchasing the Cobra ESD-9150 Radar/Laser Detector. Properly used, this Cobra product will give you many years of reliable service. Customer Support 5. Highway/City Button Should you encounter any problems with the product or not understand its many features, please refer to this owner ’s manual.
Installation Location Installation Location Selecting the proper location to mount the Cobra ESD-9150 is very important for optimum performance. Both radar and laser transmissions pass through glass but not through other objects. For this reason the Cobra ESD-9150 lenses must not be blocked. It should have a view of the rear window to take advantage of LaserEye® 360˚ detection. It is best to locate your detector as low on the front windshield as possible.
Installation Dash Mounting Quick Start Dash Mounting Turn On and Adjust Volume Turn On and Adjust Volume Note 1 1 Note It will be easy for you t o remove and reinstall your Cobra ESD-9150 detector at any time using this hook and loop material on the dashboard. Peel protective paper off one side of hook and loop material. 2 Place on dash.
Quick Start Set Display Brightness Quick Start Set Display Brightness Select from three levels of LED brightness for your Cobra ESD-9150 display: Bright, Dim and Dark. Set Highway/ City Mode Set Highway/City Mode City Mode For urban driving–reduces number of X-Band audible alerts. Note The factory default mode is Highway setting. For more detailed operation instructions on set highway/city mode, see page 11. LED Displays Note A three level display brightness is provided for dusk or night driving.
Quick Start Set Muting Mode Operation Set Muting Mode Turning On Your ESD-9150 Turning On Your ESD-9150 Auto Muting Automatically reduces volume of alert in progress after 4 seconds. Plug power cord into detector. 2 Plug power cord into cigarette lighter. Note The factory default mode is Auto Muting. For more detailed operation instructions on setting muting mode, see page 12. Note Manual Muting 1 Press and release MUTE button to reduce volume of alert in progress.
Operation Dim Button Operation Dim Button You may select from three levels of brightness for your Cobra ESD-9150 display: Bright, Dim,and Dark. Highway/City Mode The Highway/City function is controlled by a 2-step button. In the City mode, false radar alerts will be reduced. To engage City Mode: 1 Note Bright = “Beep-Beep” Dim = “Beep” Dark = “Beep” 2 3 10 Press and release DIM button to reduce the LED display brightness to Dim.A single beep confirms dim LED brightness.
Operation Muting Mode Detection Muting Mode The ESD-9150 offers two Mute Modes; Auto and Manual.To switch between these modes: Note Auto Mode Mute =“Beep” Auto Mute=“Beep-Beep” Note In either mode, the next alarm will begin with normal volume. The ESD-9150 will retain the chosen mode while OFF. Calibrate Compass location in your vehicle or move it to another vehicle, the compass must be recalibrated. 1 Press and release MUTE button when no signal is being received to turn Auto Mute on and off.
Detection Begin Band Detection Detection Band Detection This detector is designed to detect X, K, Superwide Ka Band Radar, Laser (including LTI 20-20*,Ultra Lyte* and ProLaser* technologies), VG-2, Safety Alert and Strobe Alert* signals. *360˚ Detection Radar Radar The display will show the band (X,K/Ka). The signal strength will first be indicated by the band being illuminated, then by signal strength LEDs which increase in size as you approach the radar gun.
Detection VG-2 Alert Detection VG-2 Undetectable The Cobra ESD 9150 is undetectable by police VG2 detection devices. It will alert you when one is in use near your vehicle. During this time, the unit is still on full alert and able to detect other signals. The VG-2 LED on the front of the unit will illuminate. Note Operation of the VG-2 Audio Alert may be selected by the user.The factory default setting is in the “ON” position.
Detection Radar/VG-2/ Laser Alerts Detection Radar/VG-2/Laser Alerts Type of Audible Signal Interpretation and Response Your COBRA ESD-9150 starts to signal slowly, then increases in rate very rapidly. Most likely police radar. FULL ALERT. Your COBRA ESD-9150 signals just once. Most likely a false source, or could be pulsed radar. Exercise Caution. Very fast signal rate instantly. Radar or VG-2 close by has been suddenly switched on. FULL ALERT. Slow signal rate as you approach hill or bridge.
Detection Radar Frequencies Detection Radar Frequencies There are now three frequencies that have been approved by the FCC (Federal Communications Commission) for use in speed monitoring equipment. They are: X Band (10.525 GHz),K Band (24.150 GHz) Ka Band (33.400-36.000 GHz) Your Cobra ESD-9150 can detect signals in all three radar bands including photo radar and STALKER radar which use the Ka band, and Cobra’s Safety Alert signals on the K band.
Specifications Specifications Limited One Year Warranty GENERAL SPECIFICATIONS A.FREQUENCIES 1. X BAND 10.525 GHz ± 50 MHz 2. K BAND 24.150 GHz ± 100 MHz 3. Ka BAND 33.4 - 36.0 GHz 4. VG-2 11.4 GHz - 11.7 GHz 5. Safety Alert 24.07,24.11,24.19 GHz 6. LTI 20-20 Laser 300 THz - 375 THz 7. Strobe Alert 300 THz - 770 THz 8. Ultra Lyte Laser 300 THz - 375 THz 9. ProLaser 300 THz - 375 THz B. UNIT DIMENSIONS 3.25”W x 1.
Optional Accessories Accessory Order Form Item # 420-080-N-001 420-080-N-002 545-139-N-001 Description Prices subject to change without notic e. Straight 12V DC Power Cord Includes plug and fuse 420-080-N-001 Curled 12V DC Power Cord Includes plug and fuse 420-080-N-002 Windshield Mounting Bracket Includes suction cups 545-139-N-001 Tax Table Illinois residents add 8.
© 2000 Cobra Electronics Corporation 6500 West Cortland Street Chicago, IL 60707 www.cobra.com If You Think You Need Service For technical assistance,please call our Automated Help Desk which can assist The Cobra line of quality products also includes: you by answering the most frequently asked questions about Cobra products. (773) 889-3087 24 hours a day, 7 days a week.
