Radio User Manual

3. Select [IP Source] and press SELECT/OK button to switch [Dynamic] to [Static].

IP Setting

IP Source Dynamic

Press SELECT/OK to switch [IP Source] to [Static]

4. Scroll up/down to [TCP/IP] and then press SELECT/OK button to start editing.

IP Setting

IP Source Static

TCP/IP >

DNS >

Select [TCP/IP], then press SELECT/OK

5. Press UP/DOWN button to change characters, then press LEFT/RIGHT button to

shift.

TCP/IP

IP 192.169.001.100

Mask

255.255.255.000

GW 192.169.001.254

Press UP/DOWN (or number key) then LEFT/RIGHT to input IP.

6. After finishing, press REC button to confirm.

NOTE：When IP setting value (including IP, Subnet Mask, or Gateway) is illegal, IP setting

will change to default value.

TCP/IP

The IP Setting Value is

illegal ! Setting is

Changed to Default !