Radio User Manual

Wizard

ap01 61%

D-LINK 85%

default 21%

Enter [Wizard], then all available AP and its signal strength

will be shown on the screen.

6. If the Access Point is protected with an encryption key, press SELECT/OK button,

then press UP/DOWN/LEFT/RIGHT button to input the key to access the Access

Point.

Wizard

Use UP/DOWN (or number key) to input an

encryption key to access the AP if necessary.

After keying in the encryption key, press

SELECT/OK and press STOP/ESC to

7. icon will show on the topside of the screen when the wireless setting is

successful.

Wizard

Proofing the encryption key…

Network

Connect(ap01) WLAN

IP Sett ing >

Wireless >

will show when the setting is successful.

12.4.4 Inputting Static IP

1. Press SETUP button, then scroll up/down to [Network] and press SELECT/OK

button.

2. Scroll up/down to [IP Setting] and then press SELECT/OK button to enter.

Network

Connect LAN

IP Sett ing >

Use Proxy No

Select [IP Setting], then press SELECT/OK

delete a character.

Connect(ap01) WLAN

IP Setting >

ap01 61%

Network

Connect LAN

Use Proxy No

Wireless >

IP Setting >

Network

Wizard

default 21%

D-LINK 85%