WiFi Internet Radio Instruction Manual

Connecting to wired network

Step 1 - Power up Radio

First, connect to your Internet Radio adaptor and ensure the Power LED is lighting up. The Radio can

be switched on or off with the STANDBY/ON button.

Later, it will say:

 Note: Make sure LAN cable is connected to the LAN socket.

Step 2 – Choose LAN Setting

1. Rotate the Scroll knob to <System setup>, and press to confirm.

2. With the cursor pointing to <Internet setup>, press to confirm, and then rotate the Scroll knob to

<Manual settings>, and press to confirm.

3. With the cursor pointing to <Wired>, press to confirm, and then rotate the Scroll knob to <DHCP

enable>, and press to confirm.