Action-Sports Camera Part # 9907 User Manual Please read through this user manual before using the product and keep the manual for future reference. Product appearance and/or specifications are subject to change without notification.
WASPcam is a division of 636 Distributing Inc.
Safety Precautions • • Read the following guidelines before using this camera Refer to the manual instructions to operate the camera properly. Improper operation may cause damage to camera internal components • Do not store the product in dusty, dirty, or sandy areas, as its components may be damaged Do not leave the camera in places exposed to extremely high temperatures, such as direct sunlight for extended periods of time.
System Requirements The camera requires a PC with the following specifications for full HD 1080p 30fps and 720p 60fps playback Windows® 8 /Windows® 7 /Vista / XP (SP2) / MAC OS X 10.5 and later Intel® / AMD Dual-Core CPU and later At least 1 GB of RAM or higher At least DirectX 9 video card, DirectX 10 is recommended Standard USB 1.
ACCESSORIES The following items should be in your the package. If any items are missing or damaged, con your dealer immediately. 8Pin 2.
Camera Function Quick Guide Diagram Refer to the following illustrations to familiarize yourself with the buttons and controls of this camera 6
BUTTON FUNCTIONS Button Function Power Button (Top Left) To turn the camera on & off To capture pictures when recording Mode Button To switch to picture mode, video mode and playback mode M Record Button (Top Right) Start and stop taking photos/videos, Returns to the photo/video mode when you are in the menu Menu Button To enter / exit menu settings OK Button To browse photos and videos, to enter and confirm settings under setting mode, short press clear screen character To choose the last menu o
BASIC CAMERA FUNCTIONS Installing the Micro SD Card 1) Inserting the SD card • With the camera off open the back cover • Press the card slot to the right • Place the SD card in the slot • Close and lock the card slot • Do the reverse to remove the SD card **Note - Please ensure that the SD Card is inserted in the right direction or you may damage the SD card Using the Wifi button Press the wifi button above the arrow buttons to turn on the wifi mode, press again to quit wifi mode.
Maintaining the Waterproof Seal 1. Before entering water, check that the side cap and top lock all are tighten well. 2. Do not remove screws and ring around the lens. Doing so will compromise the waterproof seal of the camera. 3. When changing the battery or MicroSD card, ensure no debris (dust, sand small rocks, ect.) is on the rubber seal on the camera backing. When finished changing the battery or MicroSD card, ensure the lock is buckled securely and locked properly. 4.
icon and the recording time 2) After 2 minutes, the camera will stop recording automatically and save the video, then continue recording 3) When SD card is full, camera will delete the first video footage automatically and continue recording 4) At anytime during recording, you can press the record button to stop and save the video. The remaining time will display on the LCD screen at the top right.
Also It will auto recording every time when power on. To return to normal video, Pls choose auto recording to off. Video+Photo 1) Press menu and use right arrow to choose Video+Photo and choose 5 SEC for example (for more options refer to Video Settings), 2) Press the REC button once to take video,During recording, the camera will take photo automatically at the chosen interval continuously and save the photo, press the REC button again to stop. 3)To return to normal video, Pls choose Video+Photo to off.
Press the menu button to enter camera settings, press the left and right arrow buttons to choose burst(3 or 10 consecutive photos) then turn it on press OK button to confirm, press Menu to exit. Press the record button and the camera will take and save 3/10 consecutive photos. To stop, please change the Burst setting Off.
select “2, 5, or 8 Seconds”，then press the OK button to confirm.
Sharpness Strong / Normal / Soft Exposure +2.0 / +1.5 / +1.0 / +0.5 / +0.0 / -0.5 / -1.0 / -1.5 / -2.
iTunes program installed and you have set up an Apple account. It needs to be the Apple iOS 6.0 system or above.
Connect mobile and computer by USB cable Copy “wasp20150514.apk”to your mobile Find “wasp20150514.apk” at your mobile Click “wasp20150514.apk”” to install Using the Camera’s WIFI Cont. 2) Turn the camera on and press the menu button twice to enter system settings, press the left/right arrow buttons to choose WIFI SSID. Press the OK button to select then press the menu button to select Del then press the Ok button to delete the WIFI name. Then you can enter new a new WIFI name.
press the left/right arrow buttons to choose WIFI and select open. (Or press to enter. )The WIFI icon will show on the screen. Search the Wlan using your mobile, find the network name which you have set, connect and enter the password XXXXXXXX (whatever you saved) and confirm.
Wi-Fi Press this icon to see all the files Press this icon to download files from the camera to smartphone Press this icon to see the files that have been downloaded to your smartphone Press this icon to change your WIFI setting.
Technical Specifications Sensor 12M CMOS Video Resolution 2160 24FPS/1440 30FPS/1080P 60FPS/1080P 30FPS / 720P 120FPS / 720P 60FPS Image Size 20M / 12M Memory Micro SD card up to 64GB – Class 6 or higher Lens 170° Video Format .MP4 Image Format JPG WiFi 802.11b/g/n Audio Built-in Mic, Speaker Port 8Pin 2.0 USB(GPS/TV OUT) Battery Lithium-ion Rechargeable Battery 1050mAh Screen 1.5 inch LCD FCC Statement This device complies with part 15 of the FCC Rules.
IC Statement This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interfe The term “IC: “ before the certification/registration number only signifies that the Industry Canada technical specifications were met. This product meets the applicable Industry Canada technical specifications.
FCC Regulatory Compliance Body worn operation The device complies with RF specifications when used near your ear or at a distance of 0cm from your body. Ensure that the device accessories, such as a device case and device holster, are not composed of metal components. Keep the device away from your body to meet the distance requirement. Certification information (SAR) This device is also designed to meet the requirements for exposure to radio waves established by the Federal Communications Commission (USA).
