User's Manual

Setting Dynamike®

This controls the microphone sensitivity

(outgoing audio level).

To Transmit

To Transmit Transmit

TalkBack

Setting

Dynamike

Caution!

Be sure the antenna is properly

connected to the radio before

transmitting. Prolonged

transmitting without an

antenna, or a poorly matched

antenna, could cause damage

to the transmitter.

Be sure to read the F.C.C. Rules

and Regulations included with

this unit before transmitting.

Operation

Select desired channel.

ANT/

Initially, set fully clockwise so that maximum

voice volume is available. Dynamike® may have

to be reduced in some conditions.

Transmit

Push and hold mic button to transmit.Transmitter

is now activated.When transmitting,hold the

microphone two inches from your mouth and

speak in a clear, normal voice.Release to receive.

Setting TalkBack

This control is used to adjust the desired amount

of modulation talk back that is present at the

speaker during transmit. At fully counter-clockwise

position the talk back is off.

ANT/

29LTDBT_MANL.qxd:29 LTD BT 2/20/08 2:20 PM Page 28