User's Manual Part 2

ManualsBrandsCobra Electronics ManualsElectronicsBLUE TOOTH MODULE

Operation

Setting Brightness Mode

Press Menu/Enter knob to select Brightness

Press the Menu/Enter knob to select Brightness. Press the

Menu/Enter knob to select Day-Bright. Turn Menu/Enter

clockwise to increase brightness and turn counter-clockwise to

decrease brightness.

To set the Night-Dim level, select Night-Dim then

repeat instructions above.

Press Menu/Enter knob to save and exit routine. Press

DIM/ESC to exit menu without saving.

WX AUTO SCAN

DISPLAY COLOR

BRIGHTNESS

Note

Exit will return to the previous

menu mode. Use DIM/ESC

button exit and return to CB

Standby.

Setting the Display Color Mode

Press the Menu/Enter knob and select Display Color.

Press and release Menu/Enter to set the color.

Rotating the Menu/Enter knob changes the display

color from green to blue to amber to red then back to

green.

Press the Menu/Enter knob to save and exit and set

the Brightness mode.

SWR/CAL

NB/ANL

VOL SQ DYNAMIKERF GAIN DELTA TUNE

T BACK

SWR

CAL

OFF MIN

MINOFF

MAX

ESC

MEM SCAN

S/RF

SIG

+30dB

1.5

CAL

SWR

NB/ANL

MEMWX !

ANL

S/RF

SWR

CAL

CH 9/

CB/WX

DIM

SCAN

WX AUTO SCAN

DISPLAY COLOR

BRIGHTNESS

SWR/CAL

NB/ANL

VOL SQ DYNAMIKE RF GAIN DELTA TUNE

T BACK

SWR

CAL

OFF MIN

MIN OFF

MAX

ESC

MEM SCAN

S/RF

SIG

+30dB

1.5

CAL

SWR

NB/ANL

MEM WX !

ANL

S/RF

SWR

CAL

CH 9/

CB/WX

DIM

SCAN

SAVE AND EXIT

SET COLOR

Turn NightWatch Illumination On-Off-Hi-Low

Press the Menu/Enter knob and scroll down to select

NW Lighting.

Rotate the Menu/Enter knob clockwise to change the

setting to HI-LOW or OFF.

Press the Menu/Enter knob to save and exit.

NW IS SET HI

HI-LOW-OFF

SAVE AND EXIT

SWR/CAL

NB/ANL

VOL SQ DYNAMIKERF GAIN DELTA TUNE

T BACK

SWR

CAL

OFF MIN

MINOFF

MAX

ESC

MEM SCAN

S/RF

SIG

+30dB

1.5

CAL

SWR

NB/ANL

MEMWX !

ANL

S/RF

SWR

CAL

CH 9/

CB/WX

DIM

SCAN

NW LIGHTING

CONTRAST

RADIO CHECK

Note

To select HI-LOW-OFF, rotate

Menu/Enter knob to change

the setting. Press and release

the Menu/Enter knob to set the

Nightwatch® illumination level,

save and exit.

SIG

+30dB

1.5

CAL

SWR

NB/ANL

MEM WX !

ANL

S/RF

SWR

CAL

NB/ANL

S/RF

SWR/CAL

ESC

MEM SCAN

SCAN CH 9/19

DIM

CB/WX

VOL

DYNAMIKERF GAIN

DELTA TUNE

T BACK

SWR

CAL

OFF

MIN

OFF

MAX

SIG

+30dB

1.5

CAL

SWR

NB/ANL

MEM WX !

ANL

S/RF

SWR

CAL

NB/ANL

S/RF

SWR/CAL

ESC

MEM SCAN

SCAN CH 9/19

DIM

CB/WX

VOL

DYNAMIKERF GAIN

DELTA TUNE

T BACK

SWR

CAL

OFF

MIN

OFF

MAX

SET BRIGHTNESS

SAVE AND EXIT

Summary of content (17 pages)

PAGE 1
Operation NB/ANL NB/ANL SWR 1.5 ANL S/RF SWR CAL S/RF SWR/CAL VOL 1 2 3 CAL RX RF Setting Color Mode 5 7 Display 3the 9 +30dB SIG 1 M SQ MEM USH EN TE U P R EN RF GAIN OFF CH 9/19 MEM SCAN DIM SettingESCBrightness Mode Press Menu/Enter knob to select Brightness DELTA TUNE T BACK MIN NB/ANL SWR 1.5 ANL S/ RF S/RF SWR CAL CAL RX Press the Menu/Enter knob to select Brightness. Press the Menu/Enter knob to select Day-Bright.
PAGE 2
Operation Operation Setting Contrast Mode III. Successful pairing will be indicated by a tone to confirm entry to Connected mode. A pair record will also be established for subsequent connections. Press the Menu/Enter knob and rotate clockwise to select Set Contrast. NW LIGHTING CONTRAST RADIO CHECK B. Subsequent pairings with a cell phone: Rotate the Menu/Enter knob clockwise to increase contrast, counter-clockwise to decrease contrast.
PAGE 3
Operation Note For more information on pairing with Bluetooth® devices consult your phone’s owners manual. If you are having trouble initializing or maintaining your Bluetooth® connection completely turn off your smartphone and the radio device, wait 30 seconds, and then turn them back on. Note The radio will not alert when police are monitoring speed with radar or laser guns.
PAGE 4
Operation Note Caution Areas may include: Car on the side of the road, traffic slowdowns, hazard on road, etc. Operation AURA and iRadar continued To Place a call on Hold When other iRadar users NB detect a radar or laser signal the /ANL alert information is anonymouslyNB/ANL sent to Cobra’s cloud 3 CAL TX SWR 1.5 2 ANL servers. Within seconds, that information is processed and RX S/ RF RF Area.
PAGE 5
Operation Operation Rewind-Say-Again® Your 29 LX MAX allows you to play back the last transmission received over the airwaves and record a 10 second memo to be played back at any time. PUSH & RELEASE To Playback the Last Transmission Press and release the Rewind-Say-Again button on the mic. The last transmission (up to 10 seconds) that the radio received will be heard over the speaker. NB /ANL 2 NB/ANL SWR 1.
PAGE 6
Operation Operation Software Version/Factory Settings Setting Weather Alert Mode Displays current software version and returns unit to original factory settings. To view the software version, press the Menu/Enter knob and select Setting then Software Version. Turns WX Alert On/Off. Default is Off. Press the Menu/Enter knob to select Set WX Alert. If Weather is On, WX Alert Icon will be displayed. NB /ANL Note 3 NB/ANL SWR 1.5 2 ANL Press DIM/ESC button to return S/ RF S/RF RF to CB mode.
PAGE 7
Operation Operation NB-ANL/OFF (Noise Blanker/Automatic Noise Limiter) Button Note NB/ANL SWR 1.5 ANL The RF noise blanker is very effective in reducing repetitive noises such as ignition interference. NB/ANL S/RF S/RF 2 3 CAL SIG 1 TX 3 5 79 +30dB M SQ VOL Set first channel. Press and hold the SCAN/MEM-SCAN button. The Memory icon will appear. Select a second SCAN press CH 9/19 and hold the SCAN/MEM-SCAN button channel, again until the Memory icon appears.
PAGE 8
Operation Operation Scan CB Channels Setting Squelch To scan all 40 CB channels, the unit must be squelched. Press and release the SCAN/MEM-SCAN button once. Squelch is the “control gate” for incoming signals. NL F S/RF SWR CAL CAL 5 79 +30dB 3 SIG 1 SQ M DYNAMIKE SCAN CB SCAN 27.405 TX RX RF CAL VOL 3 2 NB/ANL SWR 1.
PAGE 9
Operation Operation Setting Squelch continued External Speaker Continued NB/ANL SWR 1.5 ANL Gate set to Desired Squelch Setting (DSS) NB/ANL S/RF S/RF 3 2 The external speaker jack is used for remote receiver SCAN CH 9/19 monitoring.
PAGE 10
Home And Office Set-Up Temporary Mobile Set-Up Base Station Operation Warning! Do not attempt to operate this transceiver by connecting it directly to 120V AC. To operate your transceiver from home or office you will need a 13.2 volt DC Power Pack rated at a minimum of 2 amps, and a properly installed base station antenna. ANT EXT MIC EXT. PTT EXT.SP. +POWER– Note For further information call Cobra Customer Service 1.773.889.3087.
PAGE 11
How Your CB Can Serve You How Your CB Can Serve You • • • • • • • • • Warn of traffic problems Provide weather and road data Provide help in event of an emergency Provide direct contact with home or office Assist police by reporting erratic drivers Get “local information” to find destination Communicate with family and friends Suggest spots to eat and sleep Keep you alert while traveling A Few Rules You Should Know A. Conversations cannot last more than 5 minutes with another station.
PAGE 12
How Your CB Can Serve You CB 10-Codes Citizen Bands have adopted the “10-CODES” for standard questions and answers. These codes provide quick and easy communication, especially in noisy areas.
PAGE 13
Frequency Ranges 29 LX MAX Specifications The Cobra 29 LX MAX transceiver represents one of the most advanced AM two-way radios used as a Class D station in the Citizens Radio Service. This unit features advanced Phase Lock Loop (PLL) circuitry providing complete coverage of all 40 CB channels. Channel Channel CB Freq. CB Freq. WX Freq. Channel In MHz Channel In MHz Channel In MHz 1 26.965 21 27.215 1 2 26.975 22 27.225 2 3 26.985 23 27.255 3 4 27.005 24 27.235 4 5 27.015 25 27.
PAGE 14
Limited Two Year Warranty Optional Accessories You can find quality Cobra products and accessories at your local Cobra dealer, or in the U.S.A., you can order directly from Cobra. See ordering info on page 44. COBRA ELECTRONICS CORPORATION warrants that its Cobra CB Radios, and the component parts thereof, will be free of defects in workmanship and materials for period of two (2) years from the date of first consumer purchase.
PAGE 15
FCC Statement FCC Part 15.19 Warning Statement THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. FCC Part 15.21 Warning StatementNOTE: THE GRANTEE IS NOT RESPONSIBLE FOR ANY CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIANCE.
PAGE 16
29 LX MAX If You Think You Need Service For technical assistance, please call our Automated Help Desk which can assist you by answering the most frequently asked questions about Cobra products. (773) 889-3087 24 hours a day, 7 days a week. A Consumer Service Representative can be reached through this same number The CB Story Operating Instructions For Your Cobra 29 LX MAX CB Radio With Wireless Technology 2 1 R NB/ANL SWR 1.5 ANL NB/ANL 8:00 am - 5:30 pm, Monday through Friday, Central Time.
PAGE 17
Controls and Indicators Our Thanks to You Optional Accessories Front Side 1. 6-Pin Microphone Connector 2. Power On/Off, Volume 3. Squelch 4. RF Gain 5. Menu/Enter/Channel Selector 6. Dynamike 7. Delta Tune 8. Talk Back Control 9. SWR Calibration 10. Dim/Escape Button 11. Channel 9/Channel 19 Button 12. Scan/Memory Scan 13. CB/WX Weather Button 14. LCD Display 15. RX (Receive)/TX (Transmit), Indicators 16. Signal Strength Meter 17. S/RF SWR CAL Button 18. NB/ANL Button 19.