User's Manual

Nothing Comes Close to a Cobra
®
English
12
13
GPS Settings
Your Detector
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Your Detector
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
GPS SETTING VALUE
Speed Units MPH*/KPH
Speed Mute Off*/10/15/20...65
Speed Alert Off*/40/45/50...95
Speed Camera On*/Off
Red Light Camera On*/Off
Caution Area On*/Off
Speed Trap On*/Off
Lock Out On*/Off
User Location On*/Off
Delete User Location Delete All User Locations
Lock Out Delete Delete All Locked Out Locations
Menu - GPS Settings
•
Button Operation During Radar Alerts
MENU N/A
FALSE FALSE
DIM Change Brightness
MUTE / Mute Alert in Progress
SENS / Change SENS Level
Specications &
Maintenance
U.S. Patent Number: 6,078,279
WARNING Modications or parts substitutions not approved by
Cobra Electronics Corporation may violate FCC Rules and void your
authority to operate this equipment.
Maintenance
•
Your detector is designed and built to give you years of trouble-free performance
without the need for service. No routine Maintenance is required.
If your unit does not appear to be operating properly, please follow these
troubleshooting steps:
n Make sure the power cord is properly connected.
n Make sure the socket of your vehicle’s cigarette lighter is clean and free
of corrosion.
n Make sure the power cord’s cigarette lighter adapter is rmly seated in
your cigarette lighter.
To change GPS settings, enter the menu by pressing the MENU button. A voice
announces “Menu” and the display with change to
Press the MUTE button to enter the GPS menu.
Press the MUTE or MENU buttons to switch between the GPS settings.
Press the DIM or SEN buttons to change the selected GPS setting’s value.
The value that is shown on the display is the selected value. To exit the menu
simply wait several seconds or select Exit Menu.
USER GPS ALERT
LBA Types AURA LBA Types AURA
Photo Enforcement Area Speed Trap Live Police
Speed Camera Caution Area
Red Light Camera User Location
Location-Based Alerts (LBAs)
•
Your detector is equipped with an internal GPS receiver to alert you to known
speed trap as well as red-light/speed camera locations. Refer to below LBA
icons for details.
Specications
•
Band and Frequencies
Band Frequencies
X Band 10.525 ± 0.050 GHz
K Band 24.125 ± 0.125 GHz
Ka Band 34.700 ± 1.300 GHz
Laser 910 ± 50 nm 100 PPS
VG-2 11.500 ± 0.250 GHz
The known speed trap and red-light/speed camera locations (LBAs) data as
well as your detection software can be updated via the micro-USB port on your
detector. To update, connect your detector to a Windows
®
-based PC and go to
http://www.cobra.com/softwareupdates and select RAD500G to download the
latest data and/or software.
LBAs and Software Updates
•
RAD500G_MANL.indd 12-13 4/20/17 4:04 PM