User's Manual

Nothing Comes Close to a Cobra
®
11
Detection
Your Detector
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
English
10
Settings
Your Detector
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Radar Alert Settings
The detector allows you to choose whether it will show alerts on the X, K and Ka
Bands. The factory settings are: X, K, and Ka On.
Signals Detected
The tables on the following pages show you the types of Signals your detector will
detect, as well as the visual alerts it provides for each of them.
Audio Alerts
A distinctly different Alert tone is used for each type of signal detected (including
separate tones for each laser signal). For X, K and Ka band radar signals, the tones
will repeat faster as you approach the signal source. The repeat rate of the tones
gives you useful information about the signal detected. (See responding to alerts
on page 14.)
Visual Display
An indication of the type of signal detected will appear in the display.
During X, K, and Ka alerts, a number will also appear, indicating the strength of
the signal detected. (1 = weakest, 5 = strongest).
To Turn X Band On and Off
While no signal
is being detected,
press and hold
both the Dim and
Mute buttons for
four seconds.
Audible Tone Visual Display
X On = Two beeps X LED Flashes Twice
X Off = One beep X LED Flashes Once
To Turn K Band On and Off
While no signal
is being detected,
press and hold both
the Mute and SEN
buttons for
four seconds.
Audible Tone Visual Display
K On = Two beeps K LED Flashes Twice
K Off = One beep K LED Flashes Once
To Turn Ka Band On and Off
While no signal
is being detected,
press and hold
the Dim and SEN
buttons for
four seconds.
Audible Tone Visual Display
Ka On = Two beeps
Ka LED Flashes Twice
Ka Off = One beep Ka LED Flashes Once
Laser Signal Detected
X K Ka V L
VG-2 Alert Signal Detected
X K Ka V c
Weak X Signal Detected
X K Ka V 2
X K Ka V 3 X K Ka V 5
Moderate K Signal Detected Strong Ka Signal Detected
RAD350_MANL.indd 10-11 2/2/16 10:23 AM