User's Manual
Nothing Comes Close to a Cobra
®
English
6 7
Settings
Settings
Your Detector
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Your Detector
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Settings
•
When changing the Settings on your detector, please keep in mind:
n Each time the unit is turned On the factory settings of Highway and
Auto Mute-On will be set. They can be changed while the unit is in use
as described in the following sections.
Sens Mode
Setting your detector to City mode sensitivity delays all X band audio alerts at
lower signal strength levels. (A single beep will sound when the signal is rst
detected.) This will reduce false alerts while you are driving in, or near,
urban areas where there are many sources for conicting X band signals
such as microwave towers and automatic door openers.
To change settings, follow the procedure listed below, which indicates what you will
see and hear as you complete each step. The factory setting is Highway mode.
Manual Mute
Your detector allows you to quickly turn Off an audio Alert by momentarily pressing
the Mute button. If you press the Mute button a second time during
the Alert, the audio Alert will be turned back On.
Auto Mute will automatically reduce the audio volume of all alerts after four
seconds for as long as the signal is detected. The factory setting for Auto Mute
is On.
To Change From Highway Mode To City Mode
Press and release
the SEN button.
Audible Tone Visual Display
One beep
c appears in the display
To Turn Auto Mute Off
Press and release
the Mute button
while no alert
is occurring.
Audible Tone Visual Display
One beep Audio Only
To Turn Auto Mute On
Press and release
the Mute button
again while no
alert is occurring.
Audible Tone Visual Display
Two beeps Audio Only
SEN Button
Press and
release
Mute Button
Press and
release
City Mode
X K Ka V
c
Highway Mode
X K Ka V h
To Change From City Mode To Highway Mode
Press and release
the SEN button
again.
Audible Tone Visual Display
Two beeps
h appears in the display
RAD350_MANL.indd 6-7 2/2/16 10:23 AM