User manual

6
USER MANUAL 4625 - 4627
3.6 - Emergency panel LED.
The LED main scope is to show the system arming and
disarming conditions. When the system is armed the LED
gets ON and remains illuminated until the 25 s arming
period has elapsed. After that it starts blinking. It goes OFF
as soon as the system is disarmed.
3.7 - Alarms memory.
If the system has gone off (alarm ON) during the arming
time it will warn you with 3 fl ashes of the direction lights and
3 audible signals (5 audible signals if the arming/disarming
audible signals function has been activated). It also stores
in its memory the reason of the occurred alarm and shows it
on the emergency panel LED. Count the number of fl ashes
and check the corresponding alarm reason on the table. By
turning the key ON the memory will be deleted.
LED NUMBER
OF FLASHES
ALARM
ROOT CAUSE
1 fl ash Door opening detection.
2 fl ashes Ultrasonic volumetric detection.
3 fl ashes Bonnet opening detection.
4 fl ashes Ignition key ON detection.
5 fl ashes Boot opening detection.
6 fl ashes Door opening detection.
7 ÷ 14 fl ashes
“Technical alarm” detection.
Contact your installer.
3.8 - Emergency disarming.
If the vehicle original remote control get lost or if it doesn’t
work, open the door with the mechanical key and turn the
ignition key ON. If the system doesn’t disarm automatically
follow the emergency procedure described in step 5.
3.9 - Direction lights alarm fl ashes.
When the system goes off (alarm ON) the siren sounds
and the direction lights fl ash for 28 s.