User manual

USER MANUAL 4625 - 4627

1. - INTRODUCTION.

This system is equipped with a built-in CAN interface

(Controller Area Network) that allows it to detect CAN data

from the electric vehicle platform. The system can be armed/

disarmed with the vehicle original remote control or with the

Cobra remote control (optional).

2. - ARMING AND DISARMING WITH THE VEHICLE

ORIGINAL REMOTE CONTROL OR WITH THE

COBRA REMOTE CONTROL (optional).

To arm the system press the door locking pushbutton of the

vehicle original remote control or the “A” pushbutton of the

Cobra remote control.

The arming status is conﬁ rmed by:

• vehicle doors locking (only mod. 4627, with the Cobra

remote only if the CDL connections have been made);

• audible signals (if activated);

• ﬂ ashes of the direction lights;

• LED of the emergency panel illuminated.

The protection features of the system become active after

a 25 s arming period has elapsed (when the LED of the

emergency panel starts blinking).

Button A

To disarm the system press the door unlocking pushbutton

of the vehicle original remote control or the “B” pushbutton

of the Cobra remote control.

The disarming status is conﬁ rmed by:

• vehicle doors unlocking (

only mod. 4627,

with the Cobra

remote only if the CDL connections have been made);

• audible signals (if activated);

• ﬂ ashes of the direction lights;

• LED of the emergency panel OFF.

Button B

Note: if also the Driver Card (optional) is provided it will

be also possible to arm and disarm the system by

pressing its pushbutton.

The system is delivered with a set of standard functionalities

(active functions). The installer is able to activate some

more functionalities (programmable functions) with an

impact on the security and comfort the system will offer.

The following are the lists of the two groups.