User manual

Chapter 4: Using the web interface
98-129217-C Setting up the interfaces 78
Viewing network devices
All network devices that are or have been connected to the terminal are listed in the Network
devices page.
To view the list of network devices, select SETTINGS > LAN > Network devices.
If you are prompted, enter the administrator user name and password. The default user name is
admin and the default password is 1234.
Locking an IP address to a MAC address
When the device is locked to an IP address, the terminal will always assign this IP address to the
MAC address of this device.
To lock a device to its current IP address, click the link next to the device.
The device is then locked to the current IP address and added to the list of locked IP addresses at
the top of the page.
To unlock a device from the IP address, click Delete next to the device in the LOCKED IP
ADDRESSES list.
Note
You can only lock an IP address to a MAC address if DHCP is enabled (see Setting up the
local LAN IP addresses on page 67) and the Internet connection is not a Bridge mode
connection.