User manual

Chapter 4: Using the web interface
98-129217-C Setting up the interfaces 77
16. Click Apply.
Group 0 is now added to the network classification table.
This means that when both network user groups are enabled, the terminal will first search for
a device that matches the criteria set up in the network classification table for Group 0 and
assign the Bridge mode connection to this device if possible. If no device matches these
criteria, the Default network user group will be used. Note however that only one of the
network user groups can have Internet access.
17. Reboot the terminal for the changes to take effect.
You should now be able to use your Bridge mode connection. By default, the connection is
automatically activated when the terminal is ready and online, and a matching device is found.