User manual

Chapter 4: Using the web interface
98-129217-C Setting up the interfaces 73
10. At Automatic activation select whether the connection should be activated automatically or
manually.
• Disabled means you can activate/deactivate the connection from the Dashboard. This setting
is used by default for the Default user group.
• Enabled means the connection is activated automatically as soon as the system is ready.
11. Click Apply.
12. Reboot the terminal for the changes to take effect.
Setting up a Bridge mode connection
To set up a Bridge mode connection, do as follows:
1. Select SETTINGS > LAN > Network user groups.
2. When you are prompted, enter the administrator user name and password.
The default user name is admin and the default password is 1234.