User manual

Chapter 3: Operating the system
98-129217-C Using a phone or fax machine 30
To see that a new SMS has arrived you open the web interface. For further details see Receiving a
message on page 62.
Making local phone calls
You can make local calls between phones connected to the terminal.
Local phone numbers always start with 0.
For an overview of the numbers assigned to each type of interface, see Local numbers and special-
purpose numbers in the next section.
To make a local call, dial <local number> followed by # or off-hook key.
Dialling functions
Local numbers and special-purpose numbers
There are a number of dialling functions available in the terminal. The following list shows the
allocated special-purpose numbers for the terminal.
Dialling prefixes
Apart from the numbers above, the terminal uses the following dialling prefixes:
• 1* before the phone number will force the connection to use Standard Voice.
• 2* before the phone number will force the connection to use 3.1 kHz Audio.
• #31# before the phone number will hide the caller’s phone number to the recipient.
Note
Remember the “0” at the start when you dial a local phone number. If you accidently dial
a 3-digit number, you may get a service provider’s short dial number instead of a local
number.
Number Function
0 * followed by # or off-hook key Redial last called number on this interface.
00 * followed by # or off-hook key Redial last answered call on this interface.
Note: If the last answered number is unlisted, you
are not allowed to dial back.
00 followed by one of the numbers 1-199
and # or off-hook key
Short dial phone numbers in phone book.
0301 followed by # or off-hook key Local call to analogue phone.
0500 followed by # or off-hook key Local call broadcast to all IP handsets.
0 followed by one of the numbers
501-504 and # or off-hook key
Local call to IP handset.