User manual

Chapter 3: Operating the system
98-129217-C Using a phone or fax machine 26
Using a phone or fax machine
Available interfaces
Two types of voice equipment connect to the terminal:
Standard analogue phone or G3 fax machine: The terminal has one phone connector for
connecting a standard analogue phone or fax machine.
IP handset: The terminal has two LAN connectors with Power over Ethernet for connecting IP
handsets or other IP equipment. For details on the features and functions of the Thrane IP
Handset, refer to the user manual for the handset.
For information on how to connect to the interfaces, see the installation manual for the
SAILOR 150 FleetBroadband System.
Selecting the call type
Definition
The phone connection can use one of the following call types:
• Standard Voice, which is a low-tariff voice connection compressed to 4.0 kbps
• 3.1 kHz Audio, which is a high quality connection used for Premium Voice or G.3 fax
In the web interface you can set up which type of connection to use by default when you make or
receive a call from the Phone interface or from an IP handset connected to the LAN interface.
Standard Voice is selected by default.
When connecting a fax to the Phone interface you must use 3.1 kHz Audio.
Example: If you always have a fax connected to the Phone interface you can set this interface to
3.1 kHz Audio only. This will mean that if an incoming Standard Voice call is received,
the Phone interface will not ring.
Grounding stud
Power
switch
I/O
DC input
2 x LAN w. PoE
Slot for SIM card
Antenna
Reset button
Phone/Fax