User manual

Chapter 2: Getting started
98-129217-C Standard connection to the Internet (default) 21
Standard connection to the Internet (default)
By default, the terminal does not automatically connect to the Internet when you connect your
computer or other equipment to the LAN interface. You must activate your connection from the
Dashboard in the web interface or from the Thrane IP Handset.
Activating the connection from a computer (web interface)
To activate the connection from a connected computer, do as follows:
1. Access the web interface by opening your browser and entering http://ut.bgan or the IP
address of the terminal in the address bar.
“http://ut.bgan” translates into the IP address of the terminal (if your computer is set up as
described in Before connecting to the LAN interface on page 16). The default IP address is
192.168.0.1.
2. Click Start Standard under PROFILES ON LAN at the bottom of the page.
3. Check the connection, e.g. by entering a web site.
The field ONGOING DATA SESSIONS will show the IP address for the data session you started.
Note
This section only describes a Standard Internet connection with default settings on the
terminal. For information on other scenarios, see Setting up the LAN network on page 70.