User manual

Chapter 4: Using the web interface
98-129217-C Administration 121
Voice Distress
To set up the terminal for Voice Distress, do as follows:
1. Connect your Voice Distress system as described in the manual for the Voice Distress system.
2. From the left navigation pane, select ADMINISTRATION > Voice Distress settings.
3. Select the IP handset number that you are using for Voice Distress.
4. Select Enabled and click Apply.
5. Reset the terminal.
To check that the system is configured correctly, look at the Distress IP Handset and the Alarm
Panel.
• the Distress IP Handset display should show (designated for Distress), and
• the Alarm panel should show FB  (connected to a FleetBroadband terminal).
Note
You must have Voice Distress in your airtime subscription and
the software version of the Thrane IP Handset used for Distress
must be at least version 1.12, in order to support the Voice
Distress function.
Important
To make sure the Distress IP handset always keeps the
same handset number, we recommend clearing the
setting Settings > Start up options > Auto BGAN SIP in the
menu system of the Thrane IP Handset used for Voice
Distress, and to assign the number and password
manually. See the user manual for the Thrane IP Handset
and Connecting and configuring IP handsets on page 91.