User manual

Chapter 1: Introduction
98-129217-C Main units 4
SAILOR
®
150 FleetBroadband Terminal
Overview
The SAILOR 150 FleetBroadband Terminal is the controlling unit in the SAILOR 150 FleetBroadband
System. It contains all user interfaces and a Power LED indicator and stores configuration data.
Tools for setup and daily use
The Thrane IP Handset can be used for displaying status, accessing a subset of controls and views,
starting a streaming session and entering the PIN code for the terminal. The Thrane IP Handset
connects to the LAN interface of the terminal. For information on how to use the handset, see the
user manual for the Thrane IP Handset.
The built-in web interface in the terminal is used for easy configuration and daily use. The web
interface is accessed from a computer connected to the terminal, using an Internet browser. No
installation of software is needed.
For details on the web interface, see Chapter 4, Using the web interface.
The ThraneLINK Management Application (TMA) is a Windows program that provides monitoring
and software update of connected Thrane & Thrane devices with ThraneLINK support. The devices
must be on the same LAN.
For information on how to update software with the TMA, see Uploading software using the TMA
on page 126.
SIM card
The terminal has a SIM (Subscriber Identity Module) slot located in the connector panel behind a
small cover plate. The terminal requires a dedicated FleetBroadband SIM card, which you get from
your Airtime Provider.
The system requires a SIM card to go online and to access the settings of the terminal. However,
using the web interface you can view the Dashboard and upload software without inserting a SIM
card.